{"title":"Black Friday 20% Off Accessories At Checkout","description":"","products":[{"product_id":"magnetic-easel-letter-a4","title":"Magnetic Easel - Letter\/A4","description":"\u003cdiv class=\"desc\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Letter\/A4 size Magnetic Easel is a sturdy work-holding tool that provides an alternative method of positioning paper or other workpieces for use with the\u003cspan\u003e \u003c\/span\u003eAxiDraw and \u003cspan\u003eBantam Tools NextDraw™\u003c\/span\u003e. A heavy-duty easel, it can be used with binder clips or the (included) positioning rulers and magnets.\u003c\/p\u003e\n\u003cp\u003eThe base of the easel is a heavy-gauge sheet of magnetic steel. It has a powder-coat finish, lightly textured to help hold paper in place and light gray in color for visible contrast against most types of paper. Rubber bumpers on the bottom side (along with the weight of the steel) ensure a no-slip grip on your work table.\u003c\/p\u003e\n\u003cp\u003eTo help index your paper in a consistent and reproducible position, the easel includes two six-inch (15 cm) rulers that you can rest your paper up against. The rulers are easy to remove and reversible, with inch and centimeter markings on the two sides. They can also be removed completely if you like, leaving just a flat sheet of steel (with a few ruler-mounting holes in it).\u003c\/p\u003e\n\u003cp\u003eThis easel also includes six cylindrical magnets, 4 mm in diameter and 10 mm tall, that you can use to hold your paper down firmly. Their size and shape make them particularly easy to grasp and position (unlike, for example, disc magnets). Perhaps more importantly, they tend to yield and tip over if hit by an errant pen tip, rather than holding so fast as to damage your pen or move your paper. An optional set of\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/store.bantamtools.com\/products\/hold-down-magnet-and-clip-set\"\u003epaper holding clips\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ecan be added as well if you so choose.\u003c\/p\u003e\n\u003cp\u003eOverall dimensions: 12.875 × 9.580\" (32.7 × 24.3 cm).\u003cbr\u003eSuitable for use with A4 and US letter paper sizes, envelopes, and smaller sizes of paper.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":41103422455887,"sku":"SA100054","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/A4_Easel.jpg?v=1750784721"},{"product_id":"magnetic-easel-tabloid-a3","title":"Magnetic Easel - Tabloid\/A3","description":"\u003cdiv class=\"desc\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Tabloid\/A3 size Magnetic Easel is a sturdy work-holding tool that provides an alternative method of positioning paper or other workpieces for use with the\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eAxiDraw and the Bantam Tools NextDraw\u003cspan data-mce-fragment=\"1\"\u003e™\u003c\/span\u003e. A heavy-duty easel, it can be used with binder clips or the (included) positioning rulers, magnets, and magnetic spring clips.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe base of the easel is a heavy-gauge sheet of magnetic steel. It has a powder-coat finish, lightly textured to help hold paper in place and light gray in color for visible contrast against most types of paper. Rubber bumpers on the bottom side (along with the substantial weight of the steel) ensure a no-slip grip on your work table.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo help index your paper in a consistent and reproducible position, the easel includes two six-inch (15 cm) rulers that you can rest your paper up against. The rulers are easy to remove and reversible, with inch and centimeter markings on the two sides. They can also be removed completely if you like, leaving just a flat sheet of steel (with a few ruler-mounting holes in it).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis A3 easel also includes a special set of paper holding clips and magnets: Two special spring clips with magnetic bases, plus six skinny magnets for holding down paper.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/store.bantamtools.com\/products\/hold-down-magnet-and-clip-set\"\u003eExtra sets\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eare available as well if you would like to add additional clips and magnets.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe two special spring clips each have two curved tines that apply gentle pressure to your paper. They allow you to slide paper directly in and out, quickly and easily, without touching any magnets, clips, or tape. They have a long reach to be positioned behind the rulers, or elsewhere if you prefer. Magnetic bases allow you to position them where needed. Two of these spring clips provide just enough pressure to keep a sheet of paper steady while you write or draw on it. (Please note that the design of the magnetic bases for the spring clips has changed; you can see pictures of the current version\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/store.bantamtools.com\/products\/hold-down-magnet-and-clip-set\"\u003ehere\u003c\/a\u003e.)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis set also includes six cylindrical magnets, 4 mm in diameter and 10 mm tall, which are easy to position and firmly hold paper. The tall aspect ratio makes them particularly easy to grasp (unlike disc magnets). Perhaps more importantly, they tend to yield and tip over if hit by an errant pen tip, rather than holding so fast as to damage your pen or move your paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOverall dimensions: 18.12 × 12.72\" (46.0 × 32.3 cm).\u003cbr data-mce-fragment=\"1\"\u003eSuitable for use with A3 and US Tabloid\/Ledger paper sizes, envelopes, two sheets of Letter or A4 paper, or smaller sizes of paper.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":41103422750799,"sku":"SA100055","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/1_2599b5b3-2437-48bd-a5b9-e0e93930cd44.jpg?v=1750784750"},{"product_id":"hold-down-magnet-and-clip-set","title":"Hold-down Magnet and Clip Set","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe set of magnets and spring clips is designed for use with the\u003cspan\u003e \u003c\/span\u003emagnetic easel boards for\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/shop.evilmadscientist.com\/913\"\u003eletter\/A4\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/shop.evilmadscientist.com\/912\"\u003etabloid\/A3\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003esizes, but can be used with almost any magnetic surface. The set includes a pair of special spring clips with magnetic bases, as well as six skinny magnets for holding down paper.\u003c\/p\u003e\n\u003cp\u003eThe two special spring clips each have two curved tines that apply gentle pressure to your paper. They allow you to slide paper directly in and out, quickly and easily, without touching any magnets, clips, or tape. They have a long reach to be positioned behind the rulers on our magnetic easels. Magnetic bases allow you to position them where needed. Two of these spring clips provide just enough pressure to keep a sheet of paper steady while you write or draw on it.\u003c\/p\u003e\n\u003cp\u003eThis set also includes six cylindrical magnets, 4 mm in diameter and 10 mm tall, which are easy to position and firmly hold paper. The tall aspect ratio makes them particularly easy to grasp (unlike disc magnets). Perhaps more importantly, they tend to yield and tip over if hit by an errant pen tip, rather than holding so fast as to damage your pen or move your paper.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eOne full Hold-down Magnet and Clip Set like this is included with the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/shop.evilmadscientist.com\/912\"\u003eTabloid\/A3 size\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eMagnetic Easel. Purchase this item if you'd like to have additional Magnet and Clip sets, or to go with the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/shop.evilmadscientist.com\/913\"\u003eLetter\/A4 size\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eMagnetic Easel (which only includes the cylindrical magnets).\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":41103422980175,"sku":"SA100056","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/1_095687fe-0948-4f64-95d7-bba791b6ea14.jpg?v=1705633266"},{"product_id":"outrigger-feet-for-axidraw-v3","title":"Outrigger Feet For AxiDraw V3","description":"\u003ch3 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis pair of extended \"outrigger\" feet for AxiDraw V3, AxiDraw V3\/B6, and AxiDraw V3 XLX consists of a pair of machined aluminum struts with large 1\/2\" diameter (12 mm) rubber foot pads set securely in recesses. It greatly increases the effective base area of the AxiDraw, making it much more stable when plotting, and capable of carrying heavier tools without worry of tipping over.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIn addition to providing a larger footprint, the outrigger feet also provide four mounting holes that make it easier to secure your AxiDraw to a surface, should you choose to do so. Each foot strut has two top-side accessible #8\/M4 clearance holes.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eInstallation is straightforward: Remove the two screws that hold the standard foot plates to the bottom of the AxiDraw, and attach these struts in their place with the included screws.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCompatible with\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eAxiDraw V3,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eAxiDraw V3\/B6\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eAxiDraw V3 XLX. (The outrigger feet also are\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ci data-mce-fragment=\"1\"\u003emechanically\u003c\/i\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ecompatible with the\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eAxiDraw SE\/A4, however they are not a good color match for it -- if you would like us to substitute black-colored outrigger feet into your order, please\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003econtact us.)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThese outrigger feet can also serve as spare or replacement parts for the feet on models that initially came with extended feet, including \u003c\/span\u003eAxiDraw V3\/A3, SE\/A3,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eSE\/A2 and SE\/A1.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMade in USA of anodized 6061 aluminum.\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":41103423242319,"sku":"SA100053","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/1_55c03b02-c40a-4e60-9807-b0603ac207fa.jpg?v=1705629632"},{"product_id":"nextdraw-pen-clip","title":"Pen Clip for Art Machines","description":"\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eThis is the new-design pen clip for NextDraw and AxiDraw, compatible with NextDraw and recent-generation AxiDraw V3 and AxiDraw SE family plotters.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis is the same pen clip that is included when you get a new \u003ca title=\"Bantam Tools NextDraw\" href=\"https:\/\/store.bantamtools.com\/collections\/bantam-tools-nextdraw\"\u003eBantam Tools NextDraw™\u003c\/a\u003e.  It fits pens and other instruments up to 5\/8\" (16 mm) in diameter. And, it supports mounting a pen in the vertical or diagonal orientation, for pens that like to be perpendicular or at 45 degrees to the paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhile the previous-generation pen clips for AxiDraw require that you remove the two screws to switch between vertical and diagonal, this new design requires that you only\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ci data-mce-fragment=\"1\"\u003eloosen\u003c\/i\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ethe screws, making it faster to switch between orientations. Loosen the two screws slightly, lift the pen clip up, rotate to the new position, and secure the screws again.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003ciframe data-mce-fragment=\"1\" data-ready=\"true\" title=\"New Pen Clip for AxiDraw\" src=\"https:\/\/player.vimeo.com\/video\/871130951?badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\" allow=\"autoplay; fullscreen; picture-in-picture\" frameborder=\"0\" data-mce-src=\"https:\/\/player.vimeo.com\/video\/871130951?badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe pen clip is made of black anodized aluminum and includes a black nylon 8-32 thumbscrew for holding the pen in place, as well as mounting screws.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eCompatibility:\u003c\/b\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe pen clip is compatible with all NextDraw pen plotters, as well as AxiDraw V3 family pen plotters that mount the pen on a 2-hole vertical slide. AxiDraw machines manufactured after February 2017. \u003cspan data-mce-fragment=\"1\"\u003ePlease contact us if you have questions about compatibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe pen clip can optionally be used with the\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca title=\"Italic pen adapter for NextDraw\" href=\"https:\/\/store.bantamtools.com\/products\/italic-pen-adapter\"\u003eItalic pen adapter\u003c\/a\u003e, the\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/store.bantamtools.com\/products\/pen-clip-rotation-stage\"\u003ePen Clip Rotation Stage\u003c\/a\u003e, or the\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca title=\"Rigid end effector\" href=\"https:\/\/store.bantamtools.com\/products\/nd-rigid-end-effector\"\u003eRigid End Effector\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e(each sold separately).\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":41103432056911,"sku":"SA100051","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/1_8e85c803-bf76-4dfa-9013-239ce90326ea.jpg?v=1705629417"},{"product_id":"9-volt-1-5-a-dc-power-supply","title":"9 V 1.5 A DC Power Supply","description":"\u003cdiv class=\"desc\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"desc\"\u003e9 volt DC, regulated, 1500 mA AC adapter. UL Listed. Accepts worldwide 100 V - 240 V input, has a US\/Canada style plug, and is power strip friendly with a slim profile. For output, it has a center positive 2.1 x 5.5 mm output barrel plug.\n\u003cp\u003e\u003cbr\u003eThis is the replacement OEM power supply for all models of AxiDraw, EggBot, and WaterColorBot.\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e\u003cspan\u003ePlease note:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e This power supply is \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003enot\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e compatible with the Bantam Tools NextDraw™. If you need a replacement power supply for your Bantam Tools NextDraw™ in the US, please order the \u003c\/span\u003e\u003ca href=\"https:\/\/bantamtools.com\/products\/9v-2-5a-power-supply-us\"\u003e\u003cstrong\u003e\u003cspan\u003e9 V 2.5 A DC Power Supply\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e. If you need the \u003c\/span\u003einternational multi-plug\u003cspan\u003e version, please order the \u003c\/span\u003e\u003ca href=\"https:\/\/bantamtools.com\/products\/9-v-2-5-a-power-supply-multi-plug\"\u003e\u003cstrong\u003e\u003cspan\u003e9 V 2.5 A Multi Plug Power Supply\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":41103439396943,"sku":"9800004","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/1_b5671fc7-941d-4bf5-bb67-84b9b2a1ce23.jpg?v=1705628592"},{"product_id":"9-v-2-5-a-power-supply-multi-plug","title":"9 V 2.5 A Power Supply (Multi-Plug)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e9 volt DC, regulated, 2500 mA AC adapter with CE approval and multiple plugs. Accepts worldwide 100 V - 240 V input. Comes with EU plug (attached) as well as interchangeable plugs for US, UK, and AUS style plugs. For output, it has a center positive 2.1 x 5.5 mm output barrel plug.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003eThis is the OEM replacement power supply for:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBantam Tools NextDraw™ (international models)\u003c\/li\u003e\n\u003cli\u003eAxiDraw (international models), with or without \u003ca href=\"https:\/\/store.bantamtools.com\/products\/brushless-upgrade-axidraw\" title=\"Brushless upgrade for AxiDraw\"\u003ebrushless upgrade\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eEggBot (international models)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":41103439790159,"sku":"OP100013","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/1.jpg?v=1705628082"},{"product_id":"usb-2-0-cable-usb-c-to-micro-b-6-ft","title":"USB 2.0 Cable, USB-C to Micro-B, 6 ft","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cem\u003e\u003c\/em\u003e \u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis is a shielded USB C to USB micro B cable that works with AxiDraw and EggBot models that have a micro-B USB connector, and is suitable for use on compatible computers that have USB C ports.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe USB micro B connector is a standard connector used on many smartphones and tablets. This USB 2.0 cable features a USB C male plug on one end and a USB micro B male plug on the other end. It is shielded to protect against signal interference and data loss.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWorks with the Bantam Tools NextDraw\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e™\u003c\/span\u003e,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/store.bantamtools.com\/products\/ebb-driver-board\"\u003eEBB v 2.7\u003c\/a\u003e, and AxiDraw, WaterColorBot and EggBot models that have a Micro-USB port.\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":41103440314447,"sku":"SA100057","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/1_e5b66283-cc28-4036-881e-533157f35f28.jpg?v=1705633433"},{"product_id":"usb-a-to-micro-b-cable-6-ft","title":"USB 2.0 Cable, USB-A to Micro-B, 6 ft","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eThis is a shielded USB A to USB micro B cable that works with \u003cmeta charset=\"utf-8\"\u003eBantam Tools NextDraw™, and AxiDraw and EggBot models that have a micro-B USB connector, and is suitable for use on compatible computers that have USB A ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eCompatible with the \u003cmeta charset=\"utf-8\"\u003eBantam Tools NextDraw™,\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/store.bantamtools.com\/products\/ebb-driver-board\"\u003eEBB v 2.7\u003c\/a\u003e\u003cspan\u003e, and AxiDraw, WaterColorBot and EggBot models that have a Micro-USB port.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFeatures:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUSB 2.0 compliant\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6 ft long (2 m)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e28 AWG data and power conductors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMolded connector heads with molded strain relief boots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShielded to protect against external signal interference\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":41103440773199,"sku":"SA100058","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/1_4abf8e0d-e729-4b86-8712-08c17c5b9b64.jpg?v=1705633461"},{"product_id":"nd-rigid-end-effector","title":"Rigid End Effector for NextDraw \u0026 AxiDraw","description":"\u003cp data-mce-fragment=\"1\"\u003eThis rigid end effector plate is designed to be \u003ci data-mce-fragment=\"1\"\u003ein place\u003c\/i\u003e of the standard pen-lift Z stage, and provides an alternative mounting scheme for mounting various things to the end of the arm on your NextDraw or AxiDraw, for applications where greater rigidity is important but the lifting ability of the standard Z stage is not required.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe rigid end effector is custom machined from aluminum, and provides six M3 tapped holes and two M4 tapped holes for mounting what ever it is that you would like to mount to the end of the arm, to use it as a 2D robot arm. The hole pattern is compatible with the NextDraw (black) pen clip as well as older AxiDraw pen clips with a 4-hole pattern, so you can, if you like, mount the pen clip to this end effector.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eInstallation is straightforward, but requires either a Torx T20 driver or a Pozidriv PZ2* screwdriver, not included. Remove the pen clip, and then remove the pen-lift Z stage by removing the two screws behind it. Install the rigid end effector plate in its place, using either the original screws that held the pen-lift Z stage in place or with the two included mounting screws. You may wish to also tie back or fully remove the cable guides, which normally extend to power the pen-lift stage.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"desc\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaterial: Anodized 6061-T6 aluminum.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSize: 1.97 × 1.38 × 0.19 inches (50 × 35 × 4.8 mm).\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: Approximately 11 g.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTechnical drawing available for download \u003ca title=\"Rigid end effector PDF drawing\" href=\"https:\/\/bantam.tools\/nd\/RigidEndEffector_61-0211A.PDF\"\u003ehere\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMounting hardware: included (Two M4×12 Torx-head self-tapping screws).\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eCompatibility:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis adapter is compatible with all Bantam Tools NextDraw™ models and all AxiDraw V3, SE, and MiniKit series pen plotters. Please contact if you have questions about compatibility or applications.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe rigid end effector can be used both with the standard pen clip or with the XL Pen Clip sold separately. It is also compatible with the Pen Clip Rotation Stage as well as the Italic Pen Adapter\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e(*A Phillips P2 screwdriver can be used in a pinch, but it is a poor substitute for a proper Pozidriv driver, and may damage the screw head and\/or your driver.)\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":41350261833807,"sku":"SA100079","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/1_d2b4dbe8-59aa-41ff-8dfd-fe556296f136.jpg?v=1712264211"},{"product_id":"tripod-nextdraw","title":"Tripod Mount for NextDraw and AxiDraw","description":"\u003cp data-mce-fragment=\"1\"\u003eThis heavy-duty tripod adapter allows you to mount your NextDraw or AxiDraw to a tripod, should you have reason to do so. It is custom machined from a solid block of aluminum, and provides two standard tripod mounting points with 3\/8-16 and light-duty 1\/4-20* thread respectively. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e This tripod mount is compatible only with specific machines: \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eBantam Tools NextDraw\u003cspan\u003e™\u003c\/span\u003e 8511\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eBantam Tools NextDraw\u003cspan\u003e™\u003c\/span\u003e 1117\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAxiDraw V3, AxiDraw V3\/B6, AxiDraw V3\/A3, AxiDraw V3 XLX \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAxiDraw SE\/A4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eAxiDraw SE\/A3 manufactured in April 2019 and newer.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eWe would highly recommend using a sturdy tripod with a 3\/8-16 connection point and appropriate counterweight (sand bag, lifting weights, etc) to balance the weight of the NextDraw or AxiDraw while in use.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eInstallation is straightforward, and does not require any tools other than those included with the machine.  For models with a silver-colored (aluminum extrusion) base, remove the existing foot pads (either standard or outrigger feet, depending on model) and attach this plate to the captured nuts in the bottom surface of the extrusion. For models with a black-colored (machined aluminum) base, the tripod adapter attaches directly to tapped holes in the base of the machine.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/p\u003e\n\u003cdiv class=\"desc\" data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaterial: Anodized 6061-T6 aluminum.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSize: 3.90 × 2.36 × 0.35 inches (99.1 × 60 × 8.3 mm).\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: Approximately 144 g.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMounting hardware: included (four M4×10 high-strength steel mounting screws).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e*Please note: Given the size and weight of a NextDraw or AxiDraw, we \u003ci data-mce-fragment=\"1\"\u003estrongly\u003c\/i\u003e recommend against using the weaker 1\/4-20 thread for any but light duty, well-balanced applications.\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":41350261997647,"sku":"SA100078","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/1_87c7274b-3658-45ed-9322-44d1d65f34d5.jpg?v=1712282008"},{"product_id":"italic-pen-adapter","title":"Italic pen adapter for NextDraw and AxiDraw","description":"\u003cp data-mce-fragment=\"1\"\u003eFor a \"right handed\" grip on your pen. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe pen holder normally holds the pen parallel to the front face of the vertical pen slide, either vertically or at 45° from vertical.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis heavy-gauge aluminum adapter sits between the front face of the vertical slide and the pen clip, and serves to rotate the pen tip an additional 45°, not from vertical but out from parallel to the front face of the vertical slide. This gives your art machine the ability to hold a pen in a \"right handed\" grip, as opposed to the normal \"center-handed\" (for lack of a better description) position.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe right-handed grip makes it possible to hold the pen at a consistent angle suitable for use with regular pens, but also stub, italic, parallel, and chisel-point pens.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe italic pen adapter is made from anodized aluminum.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eCompatibility:\u003c\/b\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis adapter is compatible with all Bantam Tools NextDraw\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e™\u003c\/span\u003e pen plotters. It is also compatible with AxiDraw V3 and AxiDraw SE family pen plotters that mount the pen on a 2-hole vertical slide. Please contact us if you have questions about compatibility.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe italic pen adapter can be used both with the standard pen clip or with the XL pen clip (sold separately).\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":41350262423631,"sku":"SA100075","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/4_acae7b99-8979-49b7-8b26-01438160f737.jpg?v=1714080515"},{"product_id":"9v-2-5a-power-supply-us","title":"9 V 2.5 A Power Supply (US)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e9 volt DC, regulated, 2500 mA AC adapter with US plug. Accepts worldwide 100 V - 240 V input. For output, it has a center positive 2.1 x 5.5 mm output barrel plug.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003eThis is the OEM replacement power supply for:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBantam Tools NextDraw™  (US models)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/store.bantamtools.com\/products\/brushless-upgrade-axidraw\"\u003eBrushless upgrade\u003c\/a\u003e for AxiDraw (US models)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIf you need the international multi-plug version of this power supply, it is available \u003ca href=\"https:\/\/store.bantamtools.com\/products\/9-v-2-5-a-power-supply-multi-plug\" title=\"9V 2.5 A, international power supply\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003eIf you have a stock AxiDraw \u003cem\u003ewithout\u003c\/em\u003e the brushless upgrade, the US power supply for it is available \u003ca href=\"https:\/\/store.bantamtools.com\/products\/9-volt-1-5-a-dc-power-supply\" title=\"9v 1.5 A power supply for AxiDraw\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":41563470463055,"sku":"OP100014","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/US_Power_Cablecopy.jpg?v=1719584293"},{"product_id":"nextdraw-strap","title":"Strap Clamp for Art Machines","description":"\u003cp data-mce-fragment=\"1\"\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003ca aria-describedby=\"a11y-external-message\" href=\"https:\/\/store.bantamtools.com\/products\/nextdraw-pen-clip\"\u003estandard pen clip\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor the Bantam Tools NextDraw\u003cspan\u003e™\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003efits pens and other instruments up to 5\/8\" (16 mm) in diameter. The Strap Clamp can be used for objects of a wide variety of sizes and shapes depending on how you attach to the side slots. We include velcro straps and cable ties to get you started. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Strap Clamp is made from anodized aluminum.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eWhat comes in the box:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStrap Clamp Base\u003c\/li\u003e\n\u003cli\u003e2x hook and loop Cable Ties, 8 x 1\/2\"\u003c\/li\u003e\n\u003cli\u003e4x Cable Tie, 8\", Nylon Plastic, Black\u003c\/li\u003e\n\u003cli\u003e2x M3x6 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eCompatibility:\u003c\/b\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis adapter is compatible with all Bantam Tools NextDraw\u003cspan\u003e™\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eart machines. It is also compatible with AxiDraw V3 and AxiDraw SE family pen plotters that mount the pen on a 2-hole vertical slide. Please contact us if you have questions about compatibility.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":42026532503631,"sku":"SA100090","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/strapclamp.jpg?v=1750784837"},{"product_id":"pen-height-setup-tool","title":"Pen Height Setup Tool","description":"\u003cp\u003eThe Pen Height Setup Tool ensures consistent positioning of pens, markers, brushes, and more at 3.5mm above your paper.\u003c\/p\u003e\n\u003cp\u003eThis tool is a pleasant-to-hold disk of 300-series stainless steel, 25.4mm in diameter and 4.5mm overall thickness. One side features a milled X-shaped guide to help you align your page with precision. The other side offers an alternative round, flat surface—perfect for larger mark-making implements.\u003c\/p\u003e\n\u003cp\u003eThis is the same setup tool included with the Bantam Tools ArtFrame™, and the 3.5mm height is the default setup height in the Bantam Tools Studio™ software.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with The Bantam Tools ArtFrame™, Bantam Tools NextDraw™, and AxiDraw.\u003cbr\u003e\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":42286848737359,"sku":"NA100025","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/PenHeightSetupTool001.jpg?v=1731710228"},{"product_id":"artframe-table-rails","title":"Bantam Tools ArtFrame™ Table Rails","description":"\u003cp data-end=\"371\" data-start=\"106\"\u003eThe Bantam Tools ArtFrame™ Table Rails are an optional accessory for the \u003ca title=\"ArtFrame\" href=\"https:\/\/bantamtools.com\/collections\/artframe\"\u003e\u003cspan class=\"hover:entity-accent entity-underline inline cursor-pointer align-baseline\"\u003e\u003cspan class=\"whitespace-normal\"\u003eBantam Tools\u003c\/span\u003e\u003c\/span\u003e ArtFrame™\u003c\/a\u003e. When installed, they narrow the machine’s stance, allowing it to sit securely on narrower tables without compromising stability or performance. The Table Rails provide flexibility in table width by offering multiple mounting positions.\u003c\/p\u003e\n\u003cp data-end=\"790\" data-start=\"523\"\u003eThe Bantam Tools ArtFrame™ 2436 normally has stance dimensions of \u003cstrong\u003e32\u003c\/strong\u003e × 48 inches, which fits a 32-inch-wide table. With the Table Rails installed, the stance can be reduced to \u003cstrong\u003e28 \u003c\/strong\u003e× 48 inches or \u003cstrong\u003e24\u003c\/strong\u003e × 48 inches, making it compatible with \u003cstrong\u003e28-inch\u003c\/strong\u003e or \u003cstrong\u003e24-inch\u003c\/strong\u003e-wide tables.\u003c\/p\u003e\n\u003cp data-end=\"1072\" data-start=\"792\"\u003eThe Bantam Tools ArtFrame™ 1824 typically has stance dimensions of 29 × \u003cstrong\u003e32\u003c\/strong\u003e inches. With the Table Rails installed, the stance can be reduced to 29 × \u003cstrong\u003e28\u003c\/strong\u003e inches or 29 × \u003cstrong\u003e24\u003c\/strong\u003e inches, allowing it to fit comfortably on \u003cstrong\u003e28-inch \u003c\/strong\u003eor \u003cstrong\u003e24-inch\u003c\/strong\u003e-wide tables while maintaining full functionality.\u003c\/p\u003e\n\u003cp data-is-only-node=\"\" data-is-last-node=\"\" data-end=\"1253\" data-start=\"1074\"\u003eAs an added benefit, the Table Rails also provide additional clearance beneath the machine, creating convenient storage space for paper and materials sized to match your ArtFrame.\u003c\/p\u003e\n\u003chr\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":42287729770575,"sku":"SA100092","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/legs001.jpg?v=1731779031"},{"product_id":"chess-pawn-magnets","title":"Chess Pawn Magnets","description":"\u003cp data-pm-slice=\"0 0 []\"\u003eThese chess pawn-shaped magnets are the same style included with the Bantam Tools ArtFrame™, providing a stylish and practical way to secure your paper during plotting. This \u003cstrong\u003eset of\u003c\/strong\u003e \u003cstrong\u003e8 magnets\u003c\/strong\u003e is perfect for expanding your hold-down capacity or replacing lost pieces.\u003c\/p\u003e\n\u003cp\u003eWhile designed for the ArtFrame, these magnets also work seamlessly with our \u003ca rel=\"noopener\" href=\"https:\/\/store.bantamtools.com\/collections\/art-machine-store\" target=\"_blank\"\u003eMagnet Easels\u003c\/a\u003e for NextDraw and AxiDraw, as well as nearly any magnetic surface.\u003c\/p\u003e\n\u003cp\u003eThe chess pawn design allows for easy gripping, precise positioning, and firm paper hold-down, minimizing interference with your tools and ensuring a smooth workflow.\u003cbr\u003e\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":42287844491343,"sku":"SA100093","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/001_781fee4f-9c52-4dbb-8d6f-0d186252eee4.jpg?v=1731787409"},{"product_id":"xl-pen-clip","title":"XL Pen Clip for Art Machines","description":"\u003cp\u003eThe standard pen clip for the Bantam Tools NextDraw™ Black fits pens and other instruments up to 5\/8\" (16 mm) in diameter. This extra-large pen clip fits pens and other instruments from 1\/2\" (12 mm) to 1\" (25.4 mm) in diameter. It includes a black nylon 8-32 thumbscrew for holding the pen securely in place.\u003c\/p\u003e\n\u003cp\u003eThe XL pen clip is crafted from anodized aluminum now \u003cstrong\u003ewith a sleek black finish\u003c\/strong\u003e, designed to complement the Bantam Tools NextDraw™ Black aesthetic.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCompatibility:\u003c\/b\u003e\u003cbr\u003eThis adapter is compatible with all Bantam Tools NextDraw\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e™\u003c\/span\u003e art machines. It is also compatible with AxiDraw V3 and AxiDraw SE family pen plotters that mount the pen on a 2-hole vertical slide. Please contact us if you have questions about compatibility. Please contact us if you have questions about compatibility.\u003c\/p\u003e\n\u003cp\u003eThe pen clip can optionally be used with the Italic pen adapter, the pen clip rotation stage, or the rigid end effector (each sold separately).\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":42387538313295,"sku":"SA100089","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/xlpen1.jpg?v=1736367790"},{"product_id":"heavy-duty-pen-clip","title":"Heavy Duty Pen Clip","description":"\u003cp dir=\"ltr\" style=\"line-height: 1.38; margin-top: 0pt; margin-bottom: 12pt;\" id=\"docs-internal-guid-97f93ed2-7fff-7835-ce4a-f064bfdf0f65\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003eThe Heavy Duty Pen Clip for Art Machines is a pen holder that fits on the \u003ca href=\"https:\/\/store.bantamtools.com\/products\/bantam-tools-artframe-2436\" target=\"_blank\" rel=\"noopener\"\u003eBantam Tools ArtFrame\u003c\/a\u003e or \u003ca href=\"https:\/\/www.bantamtools.com\/nextdraw-series\" target=\"_blank\" rel=\"noopener\"\u003eBantam Tools NextDraw\u003c\/a\u003e. As compared to the \u003ca href=\"https:\/\/store.bantamtools.com\/products\/nextdraw-pen-clip\"\u003estandard pen clips\u003c\/a\u003e that ship with those machines, the Heavy Duty Pen Clip is built of thicker-gauge metal and has a side-facing design.  Both features allow you to screw down harder onto a tool than you can with the standard pen clip.  It includes an optional and customizable weighting system as well: A bolt and set of nuts that you can, if you like, mount onto the Heavy Duty Pen Clip to add additional weight to help weigh down your tool. That's helpful when working with tools like charcoal or graphite that benefit from customizable pressure. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" style=\"line-height: 1.38; margin-top: 12pt; margin-bottom: 12pt;\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003eThis clip features a new side-mounting design that ensures a firm grip on your mark-making tool. When working with the Bantam Tools ArtFrame, this potentially adds a little extra travel and clearance, since the pen-clamping screw points \"sideways\" rather than in the direction of carriage travel. Whether working with heavier instruments or ones that require consistent pressure, the Heavy Duty Pen Clip delivers reliable performance for precision applications with the ArtFrame.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" style=\"line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003eWeight: Roughly 27 g without added mass\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" style=\"line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003eOptional weights can add up to about 70 g of additional mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" style=\"line-height: 1.38; margin-top: 0pt; margin-bottom: 0pt;\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003eFits pens from about 4 -22 mm (0.16 - .866) in diameter\u003c\/span\u003e\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":42421950283855,"sku":"SA100094","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/sjdkfsd_2802be0b-1fe4-4ffc-9cdc-25aba0c170cc.jpg?v=1737595537"},{"product_id":"flexible-set-up-magnets","title":"Flexible Set Up Magnets","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\" id=\"docs-internal-guid-fb0dd0d0-7fff-8704-66e0-134a4aa20d0d\"\u003eEnhance your paper alignment with the Flexible Set Up Magnets, an optional accessory designed to ensure consistent and reproducible positioning. This set includes two magnetic strips that securely hold your paper in place by aligning against the corners with ease. Each magnet features a precisely designed notch, allowing seamless compatibility with the Pen Height setup tool for accurate corner placement. Perfect for achieving professional-quality results with minimal effort.\u003c\/span\u003e\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":42421952675919,"sku":"SA100100","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/paperalignmag.jpg?v=1737992703"},{"product_id":"pen-clip-mirror","title":"Pen Clip for Art Machines (Mirror)","description":"\u003cp id=\"docs-internal-guid-5e938846-7fff-2e32-7303-f8bdb2abb9ac\" style=\"line-height: 1.38; margin-top: 0pt; margin-bottom: 12pt;\" dir=\"ltr\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: bold; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003eThis is the new mirrored pen clip for Art Machines, included with ArtFrame, and compatible with NextDraw.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 1.38; margin-top: 12pt; margin-bottom: 12pt;\" dir=\"ltr\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003eThis pen clip is identical in function to the \u003c\/span\u003e\u003ca style=\"text-decoration: none;\" href=\"https:\/\/store.bantamtools.com\/products\/nextdraw-pen-clip\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #1155cc; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: underline; -webkit-text-decoration-skip: none; text-decoration-skip-ink: none; vertical-align: baseline; white-space: pre-wrap;\"\u003estandard version\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003e but is in a mirrored configuration for specific mounting needs. It accommodates pens and other instruments up to 5\/8\" (16 mm) in diameter and allows for mounting in either a vertical or diagonal orientation—ideal for pens that perform best when positioned perpendicular or at a 45-degree angle to the paper.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 1.38; margin-top: 12pt; margin-bottom: 12pt;\" dir=\"ltr\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003eThe mirrored configuration rotates to a 45° angle in the opposite direction from that on the standard pen clip, which is generally a better choice when working with the Bantam Tools ArtFrame, and which may – depending on your preferences – be preferable for other applications as well.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 1.38; margin-top: 12pt; margin-bottom: 12pt;\" dir=\"ltr\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003eThe pen clip is made of black anodized aluminum and includes a black nylon 8-32 thumbscrew for holding the pen in place, as well as mounting screws.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 1.38; margin-top: 12pt; margin-bottom: 12pt;\" dir=\"ltr\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: bold; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003eCompatibility:\u003c\/span\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: bold; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003eThe pen clip is compatible with all Bantam Tools ArtFrame, and Bantam Tools NextDraw pen plotters, as well as AxiDraw pen plotters that mount the pen on a 2-hole vertical slide. (Including all those AxiDraw machines manufactured after February 2017). Please contact us if you have questions about compatibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 1.38; margin-top: 12pt; margin-bottom: 12pt;\" dir=\"ltr\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003eThe pen clip can optionally be used with the \u003c\/span\u003e\u003ca style=\"text-decoration: none;\" href=\"https:\/\/store.bantamtools.com\/products\/italic-pen-adapter\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #1155cc; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: underline; -webkit-text-decoration-skip: none; text-decoration-skip-ink: none; vertical-align: baseline; white-space: pre-wrap;\"\u003eItalic pen adapter\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003e, the \u003c\/span\u003e\u003ca style=\"text-decoration: none;\" href=\"https:\/\/store.bantamtools.com\/products\/pen-clip-rotation-stage\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #1155cc; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: underline; -webkit-text-decoration-skip: none; text-decoration-skip-ink: none; vertical-align: baseline; white-space: pre-wrap;\"\u003ePen Clip Rotation Stage\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003e, or the \u003c\/span\u003e\u003ca style=\"text-decoration: none;\" href=\"https:\/\/store.bantamtools.com\/products\/nd-rigid-end-effector\"\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #1155cc; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: underline; -webkit-text-decoration-skip: none; text-decoration-skip-ink: none; vertical-align: baseline; white-space: pre-wrap;\"\u003eRigid End Effector\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 11pt; font-family: Arial,sans-serif; color: #000000; background-color: transparent; font-weight: 400; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;\"\u003e (each sold separately).\u003c\/span\u003e\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":42421955231823,"sku":"SA100095","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/MIRROR1.jpg?v=1737594571"},{"product_id":"svgplayer","title":"Bantam Tools NextDraw™ SVG Player","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Bantam Tools NextDraw™ SVG Player is a standalone controller to operate your Bantam Tools NextDraw™ Plotter so you don’t have to tether your computer.\u003c\/span\u003e\u003c\/p\u003e","brand":"Bantam Tools","offers":[{"title":"Default Title","offer_id":43084369363023,"sku":"SC100019","price":349.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/2361\/files\/BantamToolsSVGPlayer.jpg?v=1749656595"}],"url":"https:\/\/bantamtools.com\/collections\/black-friday-20-off-accessories-at-checkout.oembed","provider":"Bantam Tools","version":"1.0","type":"link"}